今天是 管理员登录 | 旧版入口
   机电工程学院    交流合作 >学术活动

学术报告:Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures

主讲人:陈勇教授【美国南加州大学,工业与系统工程系教授】

时间:2019年3月14日 10:00-11:30

地点:大学城校区实验三号楼201会议室 

 

Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures

                         Dr. Yong Chen

                           Professor

       Epstein Department of Industrial and Systems Engineering

      Department of Aerospace and Mechanical Engineering (courtesy)

         University of Southern California, Los Angeles, California

 

ABSTRACT

Many natural structures out-perform conventional synthetic counterparts due to the specially evolved multi-scale and multi-material architectures. However, the majority of current 3D printing systems are designed to fabricate parts using a single material in a single scale mainly for structural purpose. Such complex yet beautiful designs existing in natural structures are far beyond the fabrication capability of current 3D printing systems. This talk will report our recent survey paper on biomimetic additive manufacturing (AM) technology. After a brief overview of current research progress, some of our recent work on developing an electrically assisted additive manufacturing process to fabricate complex reinforcement architectures will be presented. The fabricated structures, bio-inspired by nacre and lobster shell, can achieve highly impact resistance and self-sensing capability. Some promising applications enabled by the biomimetic structures will also be discussed. The talk will conclude with remarks and thoughts on future 3D printing developments and potential opportunities for future engineering systems.

 

Short-Bio

Dr. Yong Chen is a professor of Industrial and Systems Engineering and Aerospace and Mechanical Engineering and the Director of Daniel J. Epstein Institute at the University of Southern California (USC). He obtained the Ph.D. degree in Mechanical Engineering from Georgia Institute of Technology in 2001, and was a Senior Research and Development Engineer in 3D Systems Inc. for five years. Dr. Chen’s research focuses on additive manufacturing (3D printing) in micro- and meso- scales. He has published more than 140 publications in refereed journals and conferences as well as 12 issued and pending U.S. patents. His work has been recognized by over ten Best/Outstanding Paper Awards in major design and manufacturing journals and conferences including SME NAMRC Outstanding Paper Award, ASME MSEC Best Paper Award, ASME CIE Best Paper Award, SFF Symposium Outstanding Paper, and RPJ Outstanding Paper Award. Other major awards he received include the NSF Faculty Early Career Development (CAREER) Award, the Outstanding Young Manufacturing Engineer Award from the Society of Manufacturing Engineers, and the invitations to the National Academy of Engineering Frontiers of Engineering Symposiums. Dr. Chen is a Fellow of the American Society of Mechanical Engineers (ASME). He has served as conference/program chairs as well as keynote speakers in several international conferences. He is an associate editor for the ASME JCISE, Computer-aided Design, and IIE Transaction – Design and Manufacturing Focus, and serves on the editorial boards of Virtual and Physical prototyping, Journal of Intelligent Manufacturing, and International Journal of Precision Engineering and Manufacturing.

 

个人简介:陈勇博士,美国南加州大学工业与系统工程系和航空航天与机械工程系终身教授,Daniel J. Epstein研究院院长。2001年在美国乔治亚理工学院获得机械工程博士学位。2001年在美国乔治亚理工学院获得机械工程博士学位。2001至2006年在美国3D Systems 公司任高级研发工程师。在2006年进入南加州大学任教。 陈勇博士研究领域为增材制造(三维打印)工艺,尤其是数字化制造工艺和产品。 已经发表超过140篇同行评议的期刊及会议论文以及12件美国授权或实审专利。 陈博士的成果多次在国际设计与制造会议及期刊中获得最佳研究论文奖,包括美国制造工程学会制造研究中心杰出论文奖、美国机械工程师协会MSEC最佳论文奖、美国机械工程师协会CIE最佳论文奖、SFF研讨会杰出论文奖以及《快速样机成型杂志》杰出论文奖。除此之外,他获得的其它重要奖项还包括美国国家自然科学基金的杰出青年教师发展奖(CAREER),美国制造工程师学会(SME)的杰出青年制造工程师奖等,并曾受邀参加美国国家工程院前沿研讨会。陈勇教授是美国机械工程师协会(ASME Fellow)会士,担任多个国际会议的议程主席及主讲嘉宾。他是“精密工程与制造”与“计算机辅助设计”以及《国际工业工程会刊》的“设计与制造焦点”副主编。同时,他是《虚拟与物理原型》、《智能制造杂志》和《精密工程与制造国际杂志》的编委会成员。

[点击数:611 更新时间:2019-03-06 文章录入:lrx_01]